Documentation
Developing project documentation, manufacturing process and engineering documentation according to GOST R.
Астана
Актау
Алматы
Артём
Astrakhan
Благовещенск
Vladivostok
Volgograd
Voronezh region
Ekaterinburg
Железнодорожный
Зеленоград
Ижевск
Иркутск
Kazan
Kemerovo
Киров
Krasnodar
Krasnoyarsk
Курган
Курск
Липецк
Магадан
Москва
Moscow region
Naberezhnye Chelny
Находка
Nizhny Novgorod Region
Omsk
Perm
Петропавловск-Камчатский
Rostov region
Самара
Saratov
Тверь
Tyumen
Udmurtia
Уссурийск
Ufa
Khabarovsk
Chelyabinsk
Южно-Сахалинск
Якутск
The specialists of our company have been engineering and manufacturing bitumen depots since 2002. Over this time, we have developed efficient technologies for heating paving bitumen and built over 30 regional bitumen tank farms within the Russian Federation and CIS countries. Today we offer ground bitumen depots in vertical tanks for dark-oil products with a capacity from 100 to 500 tons.
Volume, m3 |
100 |
200 |
400 |
1000 |
2000 |
3000 |
5000 |
Wall inner diameter, mm |
4730 |
6630 |
8530 |
10430 |
15180 |
18980 |
20920 |
Wall height, mm |
6000 |
6000 |
7500 |
12000 |
12000 |
12000 |
15000 |
Wall upper flange thickness, mm |
5 |
5 |
5 |
6 |
6 |
6 |
6 |
Wall lower flange thickness, mm |
5 |
5 |
5 |
6 |
8 |
9 |
10 |
Bottom corrosion allowance, mm |
1,0 |
1,0 |
1,0 |
1,0 |
1,0 |
1,0 |
1,0 |
Bottom center thickness, mm |
5 |
5 |
5 |
5 |
6 |
6 |
6 |
Roof deck thickness, mm |
5 |
5 |
5 |
5 |
7 |
8 |
10 |
The tank is installed on a prepared site, the tank is equipped with a register system, three independent heaters: bottom-dwelling vertical and local registers in the area of the intake manifold, a pump unit for bitumen pumping in and pumping off and heat insulation. For bitumen intake, heating is carried out only in the area of local heating to a pumping temperature of 80-110ºС. 180ºС heat-transfer oil (АМТ-300, Mobilterm, etc.) is used for heating up. For further intensive heating up of bitumen to required temperatures, it’s recommended to use 45-75 m3 active heating tanks.
Fill in our datasheet, we’ll calculate the bitumen depot manufacturing cost.